What you should pay attention while using electronic flat irons

Electronic flat irons are the tools for ironing and pressing the clothes and fabric. It's one essential electrical appliances in the modern family. So, you know how to use the iron it? In fact, when using the iron, we need to pay attention on some issues.
Note the use of iron as follows:
1. Irons must not immersed in water.
2. Before the first use of iron, check the voltage and the voltage in your home are the same time.
3. Using interval to place the iron erected or placed in the iron, ceramics and other insulating material, so as not to ignite objects.
4. Collection of irons when the cable to protect, prevent broken leakage.
5. Use, do not let children close, to prevent a child touch the burns.
6. Irons must use three-phase power plugs, and there must be ground or zero protection.
7. Because iron is at least more than 300 watts of power, it must use thick iron wire connection in order to ensure sufficient capacity.
8. Families have enough capacity meter, 300-watt electric iron needs of the general safety of 2.5 meter, 500-watt electric iron to be safe with 3 meter, 750-watt electric iron to be safe with 5 meter, 1,000 watts An iron will have a meter with 10.
9. Irons after use natural cooling to wait before they can collection.
10. Steam iron vertical collection of the best, better service life.
11. Steam irons have a drip in the handle bar switch, according to a drop of water to the iron plate, the temperature is high enough to boil the water vapor emitted from the bottom, the iron plate temperature is too low, water can not evaporate to form a leak. Press off the water is not leaking.
12. Every time run out of steam irons, water must be poured over the net. If not quite clean, you can plug this steam emitted from the floor. Otherwise left out of the water from the floor, next heated mineral water will stick in the end analysis, and for a long time will erode floor.
3. To iron long-term durability, at least monthly to use "self-cleaning" function again, to build up the scale in the iron removal, and until it is thoroughly dry and then covered up.